Программирование OSD-контроллера MAX7456 (mypractic.ru)

author Ed   4 month ago
129 views

1 Like   0 Dislike

Что могут дисплеи Nextion? Обзор возможностей, примеры использования

Ссылки на прошлые обзоры Nextion: https://youtu.be/qZ3jludY3wQ https://youtu.be/6CE7DJEmU4I Ссылка на страницу с описанием всех команд, поддерживаемых дисплеем (регулярно обновляется): https://www.itead.cc/wiki/Nextion_Instruction_Set Другие дисплеи Nextion: https://www.itead.cc/display/nextion.html Пишите в комментариях, куда бы вы применили подобный экран!

How to Make your own characters for the MAX7456 osd (on-screen display) chip.

In this short tutorial I will show you how to create your own characters with Gimp and Notepad++ that you can upload to the MAX7456 on-screen display chip from Maxim Integrated. Please note that the original character will be overwritten! How to build a osd for your DJI Phantom or Naza quadcopter: https://www.youtube.com/watch?v=YwZQDpEUrEA The Arduino source code is available via this link: http://www.brokking.net/Youtube/MAX7456_osd_upload_code.zip Datasheet for the MAX7456: http://www.brokking.net/Youtube/MAX7456.pdf Gimp and Notepad++ sites: http://www.gimp.org/ https://notepad-plus-plus.org/

Setting up FreeRTOS on Arduino

This is video demo of setting up FreeRTOS on Arduino UNO Board. Link to Download Arduino IDE: https://www.arduino.cc/en/Main/OldSoftwareReleases#previous Link to Download Ardunio FreeRTOS Library: https://github.com/feilipu/Arduino_FreeRTOS_Library

OSD SHOWCASE | Four Interesting Ways To Put an OSD On Your Quadcopter

It used to be that an OSD was more trouble than it was worth. Not anymore! Modern OSDs are easy to install, reliable, and offer as much (or as little) functionality as you want. Here are four different ways to put an OSD onto your quadcopter. --- https://goo.gl/s0sW4v The Holybro PDBOSD v1.2 follows the familiar model of the RROSD and the HubOSD. The OSD is integrated into the PDB, and since you were going to install a PDB anyway, there's no additional work to include the PDB. Unlike the RROSD, the Holybro PDBOSD v1.2 uses MWOSD so it integrates with your flight controller to let you change PIDs and so forth in the field. --- https://goo.gl/ETJG5F The Furious FPV Passado combines an OSD and video transmitter (vTX) into a 36mm stackable board. One feature that makes it stand out is that it can be turned on and off via an Aux channel, to avoid stomping on other people at the flight field by accident. --- The DMT video transmitter from UBAD puts the OSD into the vTX! This product is not released yet at the time of making this video. -- https://goo.gl/EflWJ6 The RROSD v2 is the evolution of the original PDB+OSD board. Unlike the Holybro PDBOSD, this one is completely self-contained. It doesn't integrate with the FC, so there's no configuration or calibration or UARTs or etc. Just solder it up and go. The RROSD v2 has an improved pad layout and better voltage regulators than the v1, as well as a much higher current rating.

How to setup a minimOSD for APM or Pixhawk

This video shows how to setup a minimOSD for use with a Pixhawk or APM flight controller. Read the description for links to files and products in our shop. minimOSD modules are available in our shop: http://www.droneshop.biz/minimosd-on-screen-display-system-for-apm.html New cased minimOSD modules are also in our shop: http://www.droneshop.biz/minimosd-cased-version-on-screen-display-system-for-pixhawk-or-apm.html FTDI adapters are in our shop: http://www.droneshop.biz/ftdi-adapter-for-programming-minimosd.html You will need a minimOSD module and an FTDI adapter. FTDI adapter driver: http://www.ftdichip.com/Drivers/VCP.htm minimOSD config tool and firmware files are on our Google Docs: https://drive.google.com/folderview?id=0B-B7PQy0joGrVkZDcFNMZHFiN3M&usp=sharing&tid=0B-B7PQy0joGrUjFmb2pSTFlqcWc#list The new minimOSD extra 2.4 firmware has a special firmware for flashing the Charset now, so just load the special charset firmware onto the minimOSD module first and then load the charset. Then flash the normal plane or copter 2.4 firmware after and configure as per this video.

Проверка работы OSD-контроллера MAX7456 в системе Ардуино. Уроки Ардуино, урок 68. Сайт mypractic.ru.

Comments for video: